| 용접절차인정시험기록 |
| Procedure QUALIFICATION RECORD (PQR) |
| | | | | | | | | | | |
| PQR No. | PQR-GMAW-002 | | | | | 작성일자 | 2009-06-08 |
| WPS No. | SC-GMAW-001 | 작성(개정)일자 | 2009-04-02 | 개정번호 | | 0 |
| 용접방법(Welding Process) | | | | 용접형태(Welding Type) | | |
| | | | | | | | | | | |
| 1.이음(JOINT) | | | | | | | | | |
| 사용된 홈형태(Groove Design Used) | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| 2.모재(BASE METAL) | | | 6.용접자세(Position) | | | |
| 재질(Material Spec) | | | | Position of Groove | | | | |
| 형태 및 등급(Type & Grade) | | | 진행방향(Weld Progression) | | | |
| 두께(Thickness) | | | | 기타(Others) | | | | |
| 직경(diameter) | | | | | | | | | |
| 기타(Others) | | | | 7.가스(GAS) | | | | |
| | | | | | 가스사용 | | | | 단일 | |
| 3.용가재(FILLER METAL) | | | 가스조성비(Percent Composition) | | |
| 용접금속분류(A-No.) | | | | | 사용목적 | 가스종류 | 혼합비 | 유량(ℓ/min) |
| 용접봉규격(Size of Electrode) | | | | | | | | |
| F-No. | | | | | | | | | | |
| SFA Spec | | | | | | | | | | |
| AWS No.(Class) | | | | 8.전기적특성(ELEC. CHARACTERISTICS) | |
| 용착금속(Deposited Weld metal) | | | 전류형태(Current Type) | | 교류(AC) | |
| 기타(Others) | | | | 극성(Polarity) | | | 고주파교류(ACHF) | |
| | | | | | | Pass | Process | Amperes | Volts | Speed |
| 4.예열(PREHEAT) | | | | | | | | | |
| 예열온도(Preheat) | | | | | | | | | |
| 층간온도(Interpass) | | | | | | | | | |
| 기타(Others) | | | | 9.용접기법(TECHNIQUE) | | | |
| | | | | | 주행속도(Travel Speed) | | | |
| 5.후열처리(POSTED HEAT TREATMENT) | Straight or Wave Bead | | | |
| 후열온도(Temp) | | | | 위빙폭(Oscillation) | | | | |
| 후열유지시간(Holding Time) | | | Multi or Single Pass | | | | |
| 기타(Others) | | | | 기타(Others) | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| 10.인장시험(TENSILE TEST) | | | | | | | | |
| 시편번호 | Dimension | 단면적 | Ultimate Total | Ultimate Unit | 파단위치 |
| Specimen No | Width | Thickness | Area(㎟) | Load(kg) | Stress(kg㎟) | Failure Location |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| 11.굽힘시험(GUIDED BEND TESTS) | | | | | | | |
| 형태 및 도번(Type & Figure No) | 결과(Result) | | 형태 및 도번(Type & Figure No) | 결과(Result) |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| 12.충격(인성)시험 | | | | | | | | | |
| Specimen | DWT | Break | No Break | Specimen | Notch | Notch | Test | Impact | Lateral Exp | |
| No. | Temp | | | No | Location | Type | Temp | Value | Shear | Mils |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| 13.RT TEST (NDE) | | | | | | | | | |
| Specimen No | 결함종류(Kind of Indication) | 판정 | | Specimen No | 결함종류(Kind of Indication) | 판정 |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| 14.필렛용접시험(FILLET WELD TEST) | | | | | | | |
| No. | Result of Satisfaction | Penetration into Parent Metal | No. | Result of Satisfaction | Penetration-P. Metal |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| 15.기타시험(OTHER TEST) | | | | | | | | |
| 융착분석(Deposit Analysis) | | | | | | | | |
| 시험형태(Type of Test) | | | | | | | | |
| Macro Result | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| Welder Name | | | | | Clock No. | | | |
| Test Conducted by | | | | Stamp ID No. | | | |
| | | | | | | Laboratory No. | | | |
====================================
다운로드는
www.iso9000.com.ne.kr을 참조하세요
====================================